What 60-80 mph Electric Two-Wheelers Require

Most people would choose an electric two-wheeler with a speed ranging from 60 to 80 miles per hour as their primary means of transportation. This requires the motor controller of the vehicle to have sufficient performance to handle the actual challenges. Whether driving on congested urban roads or accelerating onto rural roads, the controller must provide a stable power output and ensure that the vehicle has a long range. The WISEDRV controller has been recognized in this field by the industry.

 

Greater torque, with a peak phase current of 260A 

One of the most common problems encountered with electric two-wheelers is insufficient power when carrying heavy loads or climbing slopes. We can observe that the ordinary controller often struggles when climbing slopes, resulting in excessive slowdown of the riding speed. However, WISEDRV has specially designed this controller to address this pain point. It provides a peak current of up to 260A, effectively solving this problem. Compared to the typical 180A peak controller, the performance has improved by nearly half. This makes the acceleration of electric two-wheelers more agile, and their climbing ability stronger. When overtaking or climbing slopes, you won't feel "extremely strenuous" anymore.

 

A controller that is compatible with various voltages 

It is believed that many vehicle manufacturers or car companies will encounter a problem, which is the compatibility of batteries. Many cyclists upgraded from 48V to 60V or 72V, only to find that the old controllers were incompatible. The WISEDRV controller is applicable within the voltage range of 35 to 85V and can support 48V, 60V and 72V systems. This wide rated voltage and working voltage range enables the use of the same controller when replacing the battery pack, saving costs while avoiding the trouble of inventory accumulation. To some extent, it achieves "universal application for one machine".

 

Compatible with Hall and magnetic encoders 

Regarding the type of motor, some electric two-wheelers use Hall sensors, while others use magnetic encoders. If the wrong controller is purchased, it may result in a return or the need to re-plan the production line procurement. This not only wastes cost resources but also consumes extra manpower. Therefore, our compatible hall and magnetic encoder electric vehicle controller can be compatible with both sensor types (the encoder requires a 5V power supply), and can cover over 95% of the mainstream motors.

 

Diversified Cooling with New External Water Cooling Plate

At a cycling speed of 60 to 80 kilometers per hour, energy efficiency and heat management are equally crucial. After all, good heat management can enhance the range of an electric two-wheeler. Most ordinary controllers waste braking energy and cause the motor battery to overheat when operating under continuous high current. Therefore, WISEDRV has made great efforts in the cooling method - the external water-cooling plate motor controller design (which can also support natural air cooling) can maintain stable operation even when the peak current reaches 260A. Compared with designs that rely solely on natural air cooling, its heat dissipation capacity is almost 2 to 3 times higher. At the same time, this controller has the "start-generate-assist" function, which can recover energy during deceleration or downhill riding, extending the range by 5% to 10%.

 

Multifunctional and versatile

For users who desire higher configuration, the functional design of the controller is of vital importance. The controller launched by WISEDRV features an optional Bluetooth function, allowing users to monitor data in real time and adjust parameters through a mobile application. In terms of vehicle network integration, this CAN bus motor controller supports a 500kbps CAN2.0 interface and single-line communication, ensuring reliable communication with other onboard electronic devices.